Alinco EJ-41U Manuel d'instructions télécharger pdf (Page 40)

9. Maintenance / Reference

Reset

Resetting the transceiver returns all programmed contents to their factory default setting.

If any problems persist, resetting may overcome them and return the transceiver to normal opera-

tion.

Reset Procedure

While holding the FUNC key down, turn the power on.

All segments of the LCD will be displayed, then default set-

tings are displayed.

Factory Default Settings

Note: Take special care when resetting because all settings are initialized.

DR-135T DR-135E

VFO frequency 145.00 MHz 145.00 MHz

CALL frequency 145.00 MHz 145.00 MHz

Memory channel 0-99

Offset direction - -

Offset frequency 600 kHz 600 kHz

Channel step 5 kHz 12.5 kHz

Tone setting - -

Tone frequency 88.5 Hz 88.5 Hz

DCS setting - -

DCS code 023 023

Output power HI HI

Keylock setting OFF OFF

TOT OFF OFF

APO OFF OFF

Squelch level 0 0

All LCD segments

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47

Pas de commentaire

Alinco EJ-41U Manuel d'instructions Page 40