Alinco DJ-A10 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Stations de radio Alinco DJ-A10. Alinco DJ-A10 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer

Résumé du contenu

Page 1 - ALINCO, INC

A1.0-12/08ALINCO, INC.Yodoyabashi Dai-bldg 13F4-4-9 Koraibashi, Chuo-ku, Osaka 541-0043 JapanPhone: +81-6-7636-2362 Fax: +81-6-6208-3802http://www.al

Page 2 - Instruction Manual

Alert Environment and condition of use It is recommended that you check local trafc regulations regarding the use of a radio equipment wh

Page 3

Handling this productThe manufacturer declines any responsibilities against loss of life and property due to a failure of this product when used with

Page 4 - Before transmitting

Securely plug the adapter into the wall outlet. Insecure installation may result in short-circuit, electronic shock and/or re. Do not use the adapter

Page 5 - Covering ranges

About transceiver Alert Environment and condition of use Do not use the product in proximity to a TV or a radio. It may cause interference or rece

Page 6 - Conformity Symbols

Use a clean, dry cloth to wipe off dirt and condensation from the surface of the product. Never use thinner or benzene for cleaning.Check with your lo

Page 7 - SAFETY TRAINING INFORMATION

ProfessionalFM TransceiverITABLE OF CONTENTSSTANDARD ACCESSORIES ...

Page 8 - Occupational/Controlled Use

ProfessionalFM TransceiverIITABLE OF CONTENTSChannel Input by Keypad ...

Page 9 - FCC INFORMATION

ProfessionalFM TransceiverIIITABLE OF CONTENTSTone Squelch / DCS squelch (Sub tone CTCSS / DCS ) Encode Tone Setup ...

Page 10

ProfessionalFM TransceiverIVTABLE OF CONTENTSTone Burst Tone ...

Page 11 - About chargers

ProfessionalFM Transceiver01STANDARD ACCESSORIESStandard AccessoriesHand Strap Antenna Battery Charger AC Adaptor Belt Clip Instruction ManualNOTE:

Page 12 - Maintenance

Thank you for purchasing your new Alinco transceiver. Please read this manual carefully before using the product to ensure full performa

Page 13 - About transceiver

ProfessionalFM Transceiver02You may set the radio as VFO mode and Channel mode. There are also different setting parameters to properly set functions

Page 14 - PC PROGRAMMING

ProfessionalFM Transceiver033.Commercial radio Mode: When set display mode as "CH", it enters into Commercial radio mode. At this mode, ex

Page 15 - TABLE OF CONTENTS

ProfessionalFM Transceiver04 Function Key Operation Parameter Instruction Page FM Radio On/Off【A】 【1】Activate FM broadcasting receiver27 Beep Setup

Page 16

ProfessionalFM Transceiver05KEY OPERATIONS / QUICK CHART Function Key Operation Function Option Display Sub tone (CTCSS / DCS) Decode Setup【A】 【8】

Page 17

ProfessionalFM Transceiver06 Key Operation Parameter Instruction Enter and exit PageSub-tone setting: Operations are common to Decode (R-CDC),

Page 18

ProfessionalFM Transceiver07 Key Operation Parameter Instruction Enter and exit PageBusy-Channel-Lockout (BCL):Press【A】Key to move cursor to the men

Page 19 - STANDARD ACCESSORIES

ProfessionalFM Transceiver08 Function Menu Entry Function Option Display Voice Prompting Selection Press PF2 and hold this key for 3 seconds【B】/【

Page 20 - FM Transceiver

ProfessionalFM Transceiver09 Parameter Adjustment Parameter Instruction Confirm to back PagePress【A】Key to move cursor to the menu Press【B】/【C】key

Page 21

ProfessionalFM Transceiver10Press【A】Key to move cursor to the menu Press【B】/【C】key to choose the valueLCD backlight color selection:BLUE: Blue backlig

Page 22 - KEY OPERATIONS / QUICK CHART

ProfessionalFM Transceiver11BATTERY INFORMATIONCharging OperationThe battery is not charged at the factory, so please charge it before use. Charge the

Page 24

ProfessionalFM Transceiver12▲Do not charge the battery or transceiver when wet. Dry it before charging to avoid danger.Caution• Risk of explosion, ge

Page 25

ProfessionalFM Transceiver13BATTERY INFORMATIONWarning: Never charge while the radio is turned on. When turned on, the charger can't detect the c

Page 26

ProfessionalFM Transceiver14BATTERY INFORMATION6. LED Indicator: STATUS self-examine when power on (No battery) Pre-charging Charge normally Fully Ch

Page 27

ProfessionalFM Transceiver15INSTALLATION & CONNECTIONInstalling / Removing the Li-ion Battery1.Match the three grooves of the battery pack with

Page 28

ProfessionalFM Transceiver16INSTALLATION & CONNECTIONInstalling / Removing the Belt ClipInstalling the Belt Clip:1. Put the belt clip on the back

Page 29 - BATTERY INFORMATION

ProfessionalFM Transceiver17INSTALLATION & CONNECTIONInstalling the Hand StrapAttach the hand strap as shown.AccessoriesOpen the jack cover and i

Page 30

ProfessionalFM Transceiver18LCD DisplayFollowing are the meaning of the icons and signs shown on the display.Some icons may not appear while operating

Page 31

ProfessionalFM Transceiver19GETTING ACQUAINTEDAntennaEmergency AlarmSpeakerMicrophoneLCDA key/Function keyNumeric keysJacklightPower / VolumeSwitchLED

Page 32

ProfessionalFM Transceiver20Side PanelGETTING ACQUAINTEDPTT keyPF1 key (1 Primary Function key)PF2 key (2 Primary Function key)Accessory and PC

Page 33 - INSTALLATION & CONNECTION

ProfessionalFM Transceiver21BASIC OPERATIONSPower On and offTurn【POWER】/【VOLUME】dial clockwise to power on. Turn it counterclockwise to power off.Adju

Page 34

IntroductionThank you very much for purchasing this excellent Alinco transceiver. Our products are ranked among the nest in the world. This radio has

Page 35

ProfessionalFM Transceiver22Emergency Alarm FunctionBASIC OPERATIONSChange between Main Channel and FM RadioPress【A】key and then press【1】key to switc

Page 36 - GETTING ACQUAINTED

ProfessionalFM Transceiver23BASIC OPERATIONSNOTE: In Frequency + Channel mode, it shows current channel number on the right of main frequency display.

Page 37

ProfessionalFM Transceiver24AlarmWhile【PF1】key has been assigned to alarm function, press this key. An alarm beeps and starts transmitting. Press

Page 38

ProfessionalFM Transceiver25Transmitting1. Select the frequency by using the dial or keypad.2. Press the PTT key. The red TX indicator turns on while

Page 39 - BASIC OPERATIONS

ProfessionalFM Transceiver26Side Key【PF2】Function InstructionDefault setting: Monitor function1. Monitor function: In stand-by state, press and hold t

Page 40

ProfessionalFM Transceiver27ADVANCED OPERATIONSEditing Channels1.In VFO mode, enter the frequency and set the operating parameters as you desire. Afte

Page 41

ProfessionalFM Transceiver28ADVANCED OPERATIONSEnable /Disable BeepingBeep sounds to conrm or alert the operation status.In Stand-by conditions, aft

Page 42

ProfessionalFM Transceiver29ADVANCED OPERATIONSpressing【A】key, while icon is displayed on the top left corner, press 【4】key to choose positive offset

Page 43

ProfessionalFM Transceiver30NOTE:Frequency scan checks all bands allocated to the VFO. When channel scanning, the skipped channel is excluded from the

Page 44

ProfessionalFM Transceiver31ADVANCED OPERATIONSTX Power SelectionAfter pressing【A】key, while icon is displayed on the top left corner, press【9】key

Page 45 - ADVANCED OPERATIONS

5: Dust protected /Ingress of dust is not entirely prevented, but it must not enter in sufcient quantity to interfere with the satisfactory operati

Page 46

ProfessionalFM Transceiver32characters using corresponding keys.Method 2: Press and hold【PTT】key to enter the first DTMF character, then release【PTT】

Page 47

ProfessionalFM Transceiver33For example: Group code as“C” (Radio A) (Radio B) (Radio C) (Radio D)Receiver self ID

Page 48

ProfessionalFM Transceiver34NOTE: Remotely kill/stun codes should be preprogrammed using the programming software. The maximum available digit for th

Page 49

ProfessionalFM Transceiver35ADVANCED OPERATIONSerased.In frequency+channel mode, channel+Name Tag mode or VFO mode, 1 after pressing【A】key, while ico

Page 50

ProfessionalFM Transceiver36ADVANCED OPERATIONSTone Squelch / DCS squelch (Sub tone CTCSS / DCS ) Decode Tone SetupThis function enables the selecti

Page 51

ProfessionalFM Transceiver37Tone Squelch / DCS squelch (Sub tone CTCSS / DCS) Encode/Decode tones synchronized setup1.after pressing【A】key, while ic

Page 52

ProfessionalFM Transceiver38Wide/ Narrow Channel-spacing SelectionSet the proper channel-spacing value allocated to the radio services in your area. T

Page 53

ProfessionalFM Transceiver39Frequency Reverse or Talk Around1.after pressing【A】key, while icon is displayed on the top left corner, press【8】key to en

Page 54

ProfessionalFM Transceiver40Voice Compander (Reduce noise & enhance audio clarity)Enabling this function to reduce background noise and enhanc

Page 55

ProfessionalFM Transceiver41 function menu.2.Press【B】/【C】key to choose Menu 9 and display “BUSY”.3.Press【A】key then press【B】key or【C】key to choose

Page 56

Output power selectable 5W/2W/0.5W 128 PC-programmable channels Li-Ion battery pack and stand-charger as standard accessories Alphanumeric name t

Page 57

ProfessionalFM Transceiver42NOTE: DTMF signaling is applied as an optional signaling to this product.Signaling RelationsSelect how to operate the Sele

Page 58

ProfessionalFM Transceiver43PTT ID1. after pressing【A】key, while icon is displayed on the top left corner, press 【8】key to enter into function menu.

Page 59

ProfessionalFM Transceiver44WhisperThis function is to increase your voice level while talking in low voice. Do not activate this function while

Page 60

ProfessionalFM Transceiver45Voice PromptEnglish Voice-guidance is available. Key touch and some other major operations are assisted with English vo

Page 61

ProfessionalFM Transceiver46Time-Out-Timer(TOT)This function stops the transmission automatically when the continuous transmission time exceed

Page 62

ProfessionalFM Transceiver47VOX Delay This is to make a time delay at the end of VOX transmission. When you stop speaking to take breath, the radio st

Page 63 - SET MODE OPERATIONS

ProfessionalFM Transceiver48Frequency Step Size SetupTuning step can't be changed in the Channel modes but usable only in VFO mode.Frequency inpu

Page 64

ProfessionalFM Transceiver49LCD Backlight operationAlways lit, turned off and automatic are available as LCD illumination operation mode.1.Press and h

Page 65

ProfessionalFM Transceiver50ON: Always lit, not recommended as it considerably consumes battery. OFF: Remain turned off always.LCD Backlight Color Set

Page 66

ProfessionalFM Transceiver515ST: When receives signal, scan stops for 5 seconds and resume.10ST: Same, 10 seconds.15ST: Same, 15 seconds and default i

Page 67

SAFETY TRAINING INFORMATIONWarning: Please Read CarefullyA transceiver generates RF (Radio Frequency) electromagnetic energy while transmitting. Th

Page 68

ProfessionalFM Transceiver52certain audible tone is required. DJ-A10 offers 4 major tones.1.Press and hold【PF2】key while turning on the radio, and kee

Page 69

ProfessionalFM Transceiver533.Press【A】key then press【B】key or【C】key to choose parameters, that is 1 to 5. Higher the louder. Default is 2.Priority Cha

Page 70

ProfessionalFM Transceiver54Resume Factory Default (RESET)You can make all the settings of transceiver return to the factory default settings when it

Page 71

ProfessionalFM Transceiver55DEFAULT SETTINGSVFO Frequency 155.000MHzMemory Channel1ch:155.000MHz 2~128ch: BlankPF1 long press key CallPF1 short

Page 72

ProfessionalFM Transceiver56EA-211 VHF & FM radio AntennaEBC-34 Belt Clip EBP-87 Li-ion Battery Pack (DC 7.4V 1500mAh)EBP-8

Page 73 - DEFAULT SETTINGS

ProfessionalFM Transceiver57RECOMMENDED INSTALLATION OF EARPHONE MICROPHONEEarphoneUse a clip to fix with collar.Clip the PTT unit closer to your mout

Page 74 - OPTIONAL ACCESSORIES

ProfessionalFM Transceiver58TECHNICAL SPECIFICATIONS GeneralFrequency rangeTX/RX 136.000-173.995MHzFM radio76-108MHz (RX only)ModulationF3E(16K0F3E/11

Page 75

ProfessionalFM Transceiver59TECHNICAL SPECIFICATIONS Transmitter Output power (Approx.) high 5W middle 2W low 0.5W Modulation Variable reactance F

Page 76 - TECHNICAL SPECIFICATIONS

ProfessionalFM Transceiver60TROUBLE SHOOTING GUIDEProblem Corrective ActionNo powerA.The battery may be exhausting. Recharge or replace the battery.B.

Page 77

ProfessionalFM Transceiver61The receiving sound level is low or intermittentConsult with local dealers for inspection.Receiving signal is intermittent

Page 78 - TROUBLE SHOOTING GUIDE

• Use only the genuine Alinco accessories listed in this instruction manual for RF safety. Third party accessories are not guaranteed for RF s

Page 79

ProfessionalFM Transceiver62ATTACHED CHARTCTCSS Frequency Chart1 67.0 11 94.8 21 131.8 31 171.3 41 203.52 69.3 12 97.4 22 136.5 32 173.8 42 206.53 71.

Page 80 - ATTACHED CHART

ProfessionalFM Transceiver63ATTACHED CHARTDCS Chart1 017 18 073 35 165 52 261 69 356 86 464 103 6322 023 19 074 36 172 53 263 70 364 87 465 104 6453 0

Page 81

FCC INFORMATIONFOR CLASS B UNINTENTIONAL RADIATORS:This equipment has been tested and found to comply with the limits for a Class B digital device, pu

Modèles reliés DJ-A40 | DJ-W10 | DJ-W35 |

Commentaires sur ces manuels

Pas de commentaire